Three-dimensional rabbit-fur-look polyester fleece swatches and home textile applications

3D Burnout Rabbit-Fur-Look Fleece for Throws: B2B Guide to Pattern, Pile & Care Testing

Answer first: Buyers sourcing 3D rabbit-fur-look fleece should treat “rabbit fur look” and “burnout” as appearance descriptions, then define the actual polyester construction, pattern-formation method, pile direction, usable width, mass, approved surface and care tests. The live Nantong Oulai 3D Burnout Rabbit Fur Fleece product is identified as polyester and is positioned for throws, blankets, cushions and sofa textiles. It is not described as animal fibre, and its warmth, pilling, abrasion or colour-fastness performance should not be inferred without order-specific test evidence.

What facts are confirmed by the live product page?

Field Live product information Buyer action
Material Polyester rabbit-fur-look fleece Use the generic fibre content supported for the order; do not label it as rabbit fibre or real fur.
Fabric type 3D burnout rabbit-fur-look fleece Confirm how the relief is produced and approve the surface against a physical master.
Applications Blankets, throws, sofa covers/towels, cushions, bedding and décor Select tests and construction for one intended end use.
Custom options Print, colour, width, weight, yarn count, packaging and OEM/ODM options Record the chosen version; availability is not a finished specification.
MOQ 100 metres Confirm colour and specification allocation in the quotation.
Timing Samples 3–7 days; bulk production 15–25 days after confirmation Define what “confirmation” includes and reconfirm timing for the order.

The product page also uses adjectives such as fluffy, soft, warm and luxurious. These communicate the intended aesthetic; they are not universal tested grades. This guide therefore uses the page’s objective material, applications, customization, MOQ and stated timing while reserving performance decisions for approved samples and agreed methods.

Does “rabbit-fur-look” mean the fabric contains rabbit fibre?

No. The live material statement says polyester rabbit-fur-look fleece. In this context, “rabbit-fur-look” describes a visual and tactile style. An RFQ and retail composition label should use the supported generic fibre information, not convert an appearance term into an animal-origin claim.

This distinction also matters for regulatory review. Regulation (EU) No 1007/2011 includes rules for fibre names and for products containing non-textile parts of animal origin. A polyester appearance effect should not be marketed as real fur, while any actual animal-origin component would require its own documented review. The product record reviewed for this article does not identify such a component.

What should “3D burnout” mean in a purchase specification?

The phrase signals a three-dimensional decorative effect, but the page does not disclose the manufacturing chemistry or exact surface-formation route. Do not assume that it is chemically etched devoré, mechanically sculpted, embossed or merely printed. Ask the supplier to name the process used for the quoted construction and to provide face/back images and a physical sample.

The approved surface master should record:

  • pattern artwork or reference number and repeat dimensions;
  • pattern direction relative to the fabric length and width;
  • face and back identification;
  • pile height or agreed measurement approach, where relevant;
  • visible relief, boundary definition and acceptable variation;
  • ground exposure, bald areas, contamination and crush marks;
  • colour standard and lighting/viewing conditions;
  • fabric width, usable width and finished GSM.

Photographs help with communication, but a sealed physical master better represents pile direction, height and light response. Label every approval with the construction and colour version so that a sample from one option is not reused for another.

Why do nap direction and usable width change throw costing?

Long-pile surfaces can look lighter or darker when brushed in opposite directions. If all cut panels must run one way, the marker may need more fabric than a two-way layout. A directional relief repeat can add further matching loss. Calculate requirements from usable width, finished panel size, hem or binding allowance, shrinkage allowance, pattern repeat and one-way cutting—not from nominal width alone.

For a throw or blanket, approve the entire assembly: face fabric, backing if used, binding, seam construction and packaging fold. Pile trapped in seams, edge waviness and pressure marks from compression may not be visible in a loose fabric swatch. The earlier Oulai guide to usable width, repeat, nap and cutting allowance provides the calculation framework; this product guide applies it to a decorative long-pile surface.

Which tests can evaluate the surface without inventing one pass grade?

ISO 12945-2:2020 addresses propensity to surface pilling, fuzzing or matting using a modified Martindale method. ISO 12947-2:2016 addresses abrasion resistance by determination of specimen breakdown. For a high-pile decorative fleece, the buyer and laboratory should agree what observations will be recorded—such as matting, pattern loss, exposed ground or unacceptable appearance—rather than assuming that a method number supplies a universal retail pass level.

For dyed or printed versions, ISO 105-X12:2016 covers colour fastness to rubbing. Specify face-side sampling, dry and wet conditions where required, and the agreed result. If pile direction affects contact, tell the laboratory how specimens should be oriented and retain images of the tested face.

For washable products, select a procedure from ISO 6330:2021 and use ISO 5077:2007 with ISO 3759:2011 when dimensional change is required. Add an appearance review after the specified number of cycles: pattern clarity, pile matting, edge curling, shade change and seam behaviour. Test the finished throw or cushion cover as well as the fabric when assembly effects matter.

“Warm” on a product page is not a measured thermal-resistance result. If thermal performance is a purchasing requirement, define the sample assembly and method separately. Oulai’s comfort-test selection guide explains why air permeability, thermal resistance and water-vapour resistance answer different questions.

How is this product different from other Oulai pile fabrics?

This article is not another generic flannel or velvet guide. The printed coral velvet article focuses on print clarity and rotary-print approval. The 3D drop-needle flannel guide focuses on engineered stripe direction. Here the core question is how to source a rabbit-fur-look long-pile polyester surface whose 3D “burnout” terminology, relief master and care appearance must be made contractually clear.

What should the buyer include in the RFQ?

  1. Live product title/handle and selected end use: throw, blanket, cushion or sofa textile.
  2. Polyester composition statement and the required sales-market label format.
  3. Actual 3D surface-formation method for the quoted construction.
  4. Pattern file, repeat, orientation, face/back and one-way cutting rule.
  5. Finished GSM, full width, usable width and agreed tolerances.
  6. Pile or relief approval criteria and sealed physical master.
  7. Colour standard, viewing conditions and rub-fastness requirement.
  8. Wash/dry procedure, cycle count, dimensional and appearance criteria.
  9. Finished-product seam, backing, binding and packaging-compression check.
  10. Quantity by colour/specification, 100-metre MOQ interpretation and confirmation milestone for stated timing.

Frequently asked questions

Is this real rabbit fur?

No. The live product page identifies polyester rabbit-fur-look fleece. The phrase describes appearance, not rabbit fibre content.

Does “burnout” prove a particular chemical process?

No. The live page does not disclose the process. Request the actual production route and approve the physical surface rather than inferring it from the name.

Can the MOQ be split across colours?

The page states an MOQ of 100 metres but does not define colour allocation. Confirm this in the project quotation.

Are 15–25 days guaranteed for every bulk order?

No. The page states 15–25 days after confirmation. Define confirmation—such as specifications, sample, colour, artwork, quantity and commercial terms—and reconfirm timing for the order.

Authoritative Sources

Regresar al blog
Buyer guide

Practical sourcing notes for home textile buyers

Use this guide to compare materials, specifications, sampling steps and quality checkpoints before starting a home textile sourcing project.

Buyer checklist

  • Specification Confirm material, construction, size, color, finishing, label and packing requirements before quotation.
  • Sampling Use samples to approve hand feel, shrinkage, stitching, color and packaging details before bulk production.
  • Quality control Define inspection points, acceptable tolerance and testing requirements for repeatable export orders.

Related sourcing pages

Common buyer questions

What should buyers prepare before requesting a textile quotation?

Buyers should prepare product type, material, size, quantity, color standard, packaging, logo or label needs, testing requirements, destination market and target delivery date.

Can OULAI TEXTILE support private label and OEM orders?

Yes. Private label and OEM work can include material selection, sampling, size customization, color matching, labels, care tags, export packing and repeat-order production planning.