Discharge-Printed Polyester Velour for Bedding: Pattern Approval, Pile & Colourfastness
Share
Answer first: a “discharge-printed” product name is not enough to approve bedding velour. Buyers need an order-specific strike-off and process description, repeat and registration limits, pile direction, generic fibre declaration, colourfastness methods, wash-appearance criteria and sealed bulk reference. Nantong Oulai’s live FAB-0580 Discharge-Printed Velour page identifies the material as polyester velour; it publishes no universal colourfastness grade or laboratory-defined “non-shedding” level.
What does the live FAB-0580 page confirm?
| Live field | Confirmed | Buyer-controlled field |
|---|---|---|
| Material | Polyester velour | Order-specific declaration and any verification |
| Product route | Described as discharge printed | Process description, substrate ground and approved effect |
| Applications | Bedding sets, bedspreads, blankets, throws, quilt covers and winter home textiles | Separate end-use specification |
| Customization | Print, colour, width, weight, pattern, packaging and OEM/ODM | Artwork, repeat, approved values and tolerances |
| Commercial terms | MOQ 100 m; samples 3–7 days; bulk 15–25 days after confirmation | Current quotation, approval gate and shipment plan |
“Plush,” “warm,” “colourfast” and “non-shedding” are development objectives on the page, not substitute test reports or universal pass levels.
What must “discharge printed” mean in the technical annex?
Do not infer chemistry from a marketing phrase. Record the supplier’s declared route, prepared substrate, artwork version, colour references, finishing route and the sample representing the approved effect. Whether the visual effect uses colour removal, modification, overprinting or a combined route must be confirmed from the production record for the actual order.
| Approval item | Required record | Why |
|---|---|---|
| Base ground | Physical colour standard, lot and viewing condition | Ground controls motif contrast |
| Artwork | File, version, dimensions and separations | Prevents obsolete files |
| Repeat | Length/width repeat, orientation and placement area | Controls matching and yield |
| Strike-off | Signed sample on specified substrate | Locks colour, edge and pile interaction |
| Process record | Supplier-confirmed print and after-treatment route | Supports repeatability |
| Bulk release | Roll/lot IDs, tests and strike-off comparison | Links evidence to shipment |
Use the hierarchy in How to Write a Textile Purchase-Order Technical Annex and How to Prevent Sample-to-Bulk Mismatch.
How should pile direction and print be approved together?
Velour can appear lighter or darker when the pile is viewed or brushed in another direction. Approval should align nap before comparison.
- Mark roll, face and nap direction on strike-offs and bulk samples.
- Photograph with size/colour reference under a stated lighting setup.
- Inspect close for edges and at use distance for overall repeat.
- Check ground, light motifs, deep motifs and boundaries separately.
- Define one-way cutting for quilt covers, throws or bedspreads if needed.
- Record usable width excluding inconsistent selvedge or print zones.
Which colourfastness test answers which question?
| Question | Method | Do not assume |
|---|---|---|
| Laundering shade change or staining? | ISO 105-C06 with agreed procedure | One result represents every care cycle |
| Dry/wet rubbing transfer? | ISO 105-X12 | Wash fastness proves rubbing fastness |
| Daylight-related colour change? | ISO 105-B02 | Rubbing predicts light exposure |
| Grade and pass level? | Relevant ISO grey scale plus buyer target | The method provides a universal retail pass grade |
See Colour Fastness Is Not One Score. Methods define how to test; the order defines acceptance.
How should “non-shedding” and surface durability be handled?
The live title uses “non-shedding,” but no method, cycle count or result is published. Define the observable failure: loose fibre after brushing, lint transfer, pile loss after washing, matting, fuzzing, pilling or abrasion-related appearance change.
- Condition specimens and mark face, nap and orientation.
- Use ISO 12945-2 for pilling, fuzzing or matting.
- Use ISO 12947-4 for abrasion-related appearance change.
- If a recognized lint-transfer method is unsuitable, document an agreed brushing/transfer procedure, apparatus, cycles, pressure, evaluation and limit.
- Wash the intended finished prototype using the selected ISO 6330 procedure; assess print and pile separately.
- Do not reuse results from another fleece construction, colourway or print route.
What changes by bedding end use?
| End use | Main controls | Prototype |
|---|---|---|
| Quilt cover | Direction, panel matching, closure/seam and wash appearance | Finished section including closure |
| Bedspread | Large repeat, drape, edge and visible nap | Bed-scale panel |
| Throw | One-way cutting, binding, rubbing and laundering | Representative finished throw |
| Cushion | Motif centring, front/back, closure and seam pile | Cover on intended insert |
What should the RFQ include?
- FAB-0580 reference, polyester velour declaration and target market.
- Artwork version, repeat, direction, colour references and strike-off quantity.
- Supplier-confirmed meaning of “discharge printed” for this order.
- Usable width, mass, pile direction and tolerances.
- Sealed strike-off, bulk shade range and viewing protocol.
- Selected ISO 105 procedures and separately stated grades.
- Surface evaluation and any agreed lint-transfer procedure.
- Wash/dry procedure, cycle count and prototype approval.
- Roll/lot IDs connecting inspection, test and shipment.
Nantong Oulai Trading Co., Ltd. can use this evidence package to align artwork development, print approval and bulk release. The buyer should confirm market-specific labels and end-product requirements.
Frequently asked questions
Does discharge printing guarantee better colourfastness?
No. Test washing, rubbing and light exposure separately when relevant.
Can digital artwork replace a strike-off?
No. Artwork controls design intent; the physical strike-off shows the actual substrate, ground, pile and process effect.
Does “non-shedding” mean zero loose fibre?
The page does not define a method or limit. Convert it into an agreed observation or test.
Why mark nap on test samples?
Pile orientation changes apparent depth and reflection, affecting visual comparison.
What commercial terms are live?
MOQ 100 m, samples 3–7 days and bulk 15–25 days after confirmation; reconfirm for the final order.